Plumbing
A brand-new
molded tank is used to begin the internal refurbishing process.
The heat exchangers are sealed in with new seals and compression
nuts and new tubing are used to plumb the machine throughout. A
new March recirculation pump is installed, as is a Gorman-Rupp bellows
replenishment pump. To ensure accurate replenishment rates in the
plumbing system, a new incoming water solenoid valve is used to
facilitate water conservation and a new developer cooling solenoid
is also installed to maintain proper development temperatures.
Temperature
Sensing
The Kodak/Carestream M6B has two electronically-controlled temperature sensing systems the
dryer and developer temperature control. The dryer is maintained
through the use of new thoroughly tested thermistor, new dryer temperature
potentiometer and reconditioned dryer heaters. The system is protected
with an overtemperature safety thermostat and a new blower motor
is used to recirculate the tempered air through the system. The
blower assembly (which is rebuilt completely with new bearings,
main shaft, squirrel cage and machined pulleys) completes the dryer
temperature control section. The developer temperature control system
is maintained through the use of a new thermistor, new or used developer
heater assembly and is protected by an overtemperature device for
safety. The sensing circuit on the PCB100 board monitors and controls
all activities. The recirculation pump circulates the developer
consistently throughout the system, to ensure uniformity in temperature.
Finally, the developer is constantly being filtered through the
new filter canister assembly and a new LED display of the developer
temperature completes the system.
External
Features
All units are finished with new internal plastics and new panel
sets. The new "greige" color finish is both an aesthetic and eye-pleasing
finish.
Electrical
Requirements
This unit requires 240 volts. 30amp. Other electrical configurations
can be accommodated upon request.
Water
Requirements
Requires cold water only. Other specifications available upon request.
Controlled
Testing Environment
TI-BA refurbished processors are tested for a minimum of 36 hours
to ensure trouble-free operation prior to shipment to customer locations.
All adjustments and calibrations are performed during this period.
Available
Options
| Drip Tray |
Air Exhaust Kit | Small Chain Dev rack
Electrical
The
reused electrical box is completely reconditioned with new
relays, circuit breakers and a new main wire harness assembly.
All reused parts are thoroughly tested and monitored for reliability.
The new or reconditioned PCB 100 Board is used to control
all functions of the Kodak/Carestream M6B. The auto standby feature will help
conserve power and unnecessary wear and tear on parts, as
well as assist the machine in staying ready at the touch of
a button.
Drive
and Transport
At the heart of the TI-BA Kodak/Carestream M6B are the drive and transport
assemblies. The drive assembly is completely refurbished,
using a new main drive motor and a completely refurbished
main drive assembly (which includes all new bearings, worm
gears and shaft). The dryer drive assembly is assembled using
all new dryer rollers, dryer studs and belt to complete the
assembly. The final and most integral assembly included in
the unit is the rack transport assembly. TI-BA uses only the
highest quality rollers to assemble each rack included in
the system. The Kodak/Carestream M6B
transport systems consists of a detector,
developer, fixer, wash (silicone), developer/fixer crossover,
fixer/wash crossover and squeegee rack assemblies. All of
the latest OEM modifications and upgrades are incorporated
into all TI-BA transport systems.
|
